Parameter: average molecular weight:236.38(according to international relative atomic mass in 1995);appreance: white crystal powder；melting point: 51~53℃;boiling point: 315℃; refractive index:1.5633（20℃）; proportion:1.049
Product Description:high-efficient lubricant
Application:
Because of its better heat sability,ageing resistance and fluidity,it can be lubricant.Moreover,it also applies to internal-combustion engine of jet aeroplane and rocket as lubricant,as its feature of radio-resistance,which can endure great extent temperature changes.for example,it needs to have special lubricant ,which is high-temperature resistance and stable nature when the mach value of aeroplane reach 3,while temperature of ram-air rising.Or it is used as lubricant additive and radio-resistance materials.
It is applied to plastic and rubber,such as PVC、PP、PE（HDPE、LDPE、LLDPE）,etc.;or inserted into triacetate fiber instead of triphenyl phosphate;applied to PVC hard transparent product and polythene blown film and so on,having the characteristics of better consistence,stronge internal lubricating ,and boost melting effects,reducing melt viscosity,processing temperaturer,improving uniformity of plastify,being used as partial substitute of DOP、ACR、MBS instead or their assistant plasticizers,while its over-all properties
is superior to them,and there is no effect on its transparent when less 3% is added ,improving the intensity shock resistance of PVC.Besides,inserted into polyolefin bulking agent dosage, it can reduce the melt time of plastic,lower melt viscosity,improve melt fluidity and dispersity,and modify resin processing aid.Being superior to low molecular PE wax process lubricant,it can reduce the magnitude of current of main motor,save the energy waste unless we put only 0.5% a-MS cyclodimer into resin,on the same condition,output of HDPE will be increased by 1/3,especially modify shock resistance at normal temperature and the surface finishment and transparent of products.In the process of polyolefin bulking agent dosage, polyethylene blown, prill,film, polypropylene,and polyvinyl chloride,it not only can modify rheological properties,but also increase the packing ratio
of filling,reduce the process cost,and improve some of mechanical property.